Wire Mesh Decks

At Econo-Rack we carry an assortment of wire mesh decks as an alternative to safety bars. Each mesh deck has a capacity rating that exceeds 2,000 lbs UDL ( uniformed distributed load ) This means that it can carry 2,000 lbs as long as the load is distibuted along the entire surface of the mesh deck, and not on any one particular smaller area, commonly referred to as a point load.

Our mesh decks all have three 14 gauge reinforced channels welded onto the mesh. The mesh is composed of 5 gauge (0.207" diameter) wire in a 2 inch by 4 inch grid pattern

At Econo-Rack, we currently stock the following sizes:

24" deep by 46" wide 36" deep by 46" wide 36" deep by 52" wide 42" deep by 46" wide

42" deep by 52" wide 44" deep by 46" wide 48" deep by 46" wide

Tip

To be sure you are choosing the right deck, add the combinations of the widths above to suit your racking. For example, if your beams which join the frames are 96" long, you would require two mesh decks 46" wide. This adds up to 92", allowing for a bit of tolerance when installing the decks. If you have 108" beams, you would require two mesh decks 52" wide, and so on.